1. Using a large screen 12864LCD
2. back integrated SD card connector, SD card files into sections, the LCD will be printed, select the corresponding file.
3. The duct comes encoder can adjust the parameters, and select the file to print!
4.ramps plug and play on, but the need to modify the firmware to support.
5. Support Chinese fonts, modify Marlin firmware can display Chinese menu, modify the means of their own research, does not vide technical support!
RAMPS LCD12864 kit contains the following:
1.RAMPS LCD12864 Board 1
2.L a patching plate
3.FC cable 2
Note: You can insert an SD card offline printing, please bring your own SD card, this duct does not contain!
The intelligent controller includes a SD card reader, and a rotary encoder 12864LCD display. You can easily connect it to your board uses intelligent RAMPS 1.4 adapter included.
After this panel is connected to your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis motion can be done only with a rotary encoder intelligent controller. Print without a computer 3D design, just in SD card storage with G code design
On ramps plug and play, but you need to modify the firmware to support to Marlin example:
Marlin V1 ()
1.Change #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER (just remove the // at the beginning)
== REMEMBER TO INSTALL U8glib to your ARDUINO library folder: ##1## face="Tahoma">
Upload the firmware, power off the Arduino compatible , connect the panel, reapply power, and everything should work.
|Cash on Delivery||No|