MAX7219 LED display control module
MAX7219 Is an integrated serial input / output common-cathode display driver, it connects the micro cessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED. Thereon including a B-type BCD encoder chip, multi-channel scanning loop segment word driver, but also a static RAM 8 * 8 for storing each data. Only one external register is used to set the segment current of each LED.
A convenient four-wire serial interface can be connected to all general-purpose micro cessor. Each data can be addressed in the update do not need to rewrite all of the display. MAX7219 also allows each user to select a data coding or non-coding.
The entire apparatus comprising a 150 A Low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display data bits 1-8, and one for all LED luminescence detection mode.
PCB Board four corners fixed with copper studs, which can effectively prevent a short circuit accidents from happening!
Digital tube 0.36 inches four one common cathode LED
This module is compatible with 5V / 3.3V microcontroller (51 / AVR / STM32 .......)
Wiring instructions ( gram to vide an example, you can access any IO port, modify the port can be defined in the gram):
1.VCC And GND Do not reversed, so as not to burn chips
2.51 MCU P0 port need pull-up resistor, if your device does not have pull-up resistor can be connected to other ports data lines
1.MAX7219 A digital display module
2. Straight pin 5P
3. Bend pin 5P
4.MAX7219 English Data Sheet 1
5.MAX7219 Chinese Datasheet 1
6.PDF 1 Schematic format
7.51 MCU Driver 1 (single display gram module and display module gram cascade)
|Cash on Delivery||No|