More Views

CP2102 module USB to TTL USB to serial module UART STC Downloader Brush upgrade board



Quick Overview

Seller Name : mcudev
Best Quality Wholesale Price
Cash-On-Delivery: Not Available for this product



Product Details

CP2102 module USB to TTL USB to serial module
UART STC Downloader Brush upgrade board


CP2102 Description:


Single-chip USB to UART Data Converters
- Integrated USB transceiver without external resistors
- Integrated clock without external oscillator
- Integrated 512 bytes of EEPROM for vendor code is the duct code serial number plate power version number and duct description and other data to vide storage space
- Power-on reset circuit - chip voltage regulator 3.3V output USB function controller
- Full compliance with USB Specification 2.0 (12 Mbps)
- Via SUSPEND pins and RI support USB suspend state
Asynchronous serial data bus (UART)
- All handshaking and modem interface signals
- Data formats supported:
8 data bits
Stop bits 1, 2
Parity: Odd parity, even parity, no parity
- Baud Rate 300bps to 921.6kbps
-512 Byte receive buffer 512 byte transmit buffer
- Support for hardware or X-On / X-Off handshaking
- Support for event status and conditions of the suspension line
Practical COM port device driver devices
- Existing COM ports can be used in conjunction with PC applications
- License issued of copyright
-Windows 98 / Me / 2000 / XP
-X-Windows CE
-Linux 2.40 or later
Application Examples
RS-232 to USB upgrade traditional devices
- Mobile USB interface cable
-PDA USB interface cable
-USB To transfer the RS-232 serial adapter
- Self-powered: 3.0V to 3.6V
-USB Bus-powered: 4.0V to 5.25V
-28 Pin MLP (5mm * 5mm)

Tips?Very ant?:
TXD: Send side, generally expressed as their own sender, normal communication must be connected to another device RXD.
RXD: the receiver, generally designated himself on the receiving end, normal communication TXD must be connected to another device.
When normal communication itself TXD RXD always connected device!
Since the resumption of spontaneous: RXD when normal communication TXD connected to other devices, so if you want to receive data sent by itself as the name suggests, is to receive the data they transmit their own, that is directly connected to its own TXD RXD, used and receive test itself It is normal, is the quickest and easiest way to test when there is a blem to do the first test to determine whether a duct failure. Also known as the loopback test.

Level logic:
TTL level: usually binary data representation, visions equivalent to + 5V logic 1,0V equivalent to a logic 0, called TTL signal system, is positive logic
RS232 level: the use of -12V to -3V, equivalent to a logic 0, + 3V to + 12V logic level equivalent to logic 1, negative logic

duct manual:
1, the main chip CP2102, generate a virtual serial port after installing the driver
2, USB to take power, leads to the interface includes 3.3V ?40mA?, 5V, GND, TX, RX, pin signal level is 3.3V, positive logic
3, on-board status indicators, the transceiver lights, right after installing the driver status indicator lit, send and receive indicator flashes when the communication baud rate, the higher the lower the brightness
4, support the baud rate between 300bps ~ 1Mbps
5, the communication format support: 1?5,6,7,8 data bits; 2?Support 1.5, 2 stop bits; 3?odd, even, mark, space, none parity
6, supported operating systems: windows vista / xp / server 2003/200, Mac OS-X / OS-9, Linux
7, USB head is male, can be connected directly to the computer USB port
8, SMD components for the SMT duction cess, and stability
9, does not have USB head volume:?mm)
Buy this duct includes the following accessories:
1, a welding test good module
2,20cm long 4P Dupont line


Related Images

Additional Information

SKU AF0502220410
Cash on Delivery No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Don't Miss Out

Stay up-to-date with the latest news, hottest trends and new arrivals direct to your inbox

//inkocean pagelog