Support: [email protected]
More Views

NRF24L01 + power enhanced version 2.4G wireless module

AF0502220418

Available

Quick Overview

Seller Name : mcudev
Best Quality Wholesale Price
Rs235.00
Cash-On-Delivery: Not Available for this product

OR

Details

Product Details

NRF24L01 is a world-wide work in the 2.4-2.5GHz ISM band single-chip transceiver chip, wireless transceiver comprising: a frequency generator SchockBurstTM Enhanced mode controller power amplifier modulator crystal amplifier output power demodulator channel selection and protocol settings can be set very low current consumption through the SPI interface, the transmit power when operating in the transmit mode when 6dBm lower current consumption is 9.0mA 12.3mA receiving mode is the power-down mode and standby mode current consumption mode.

 

Ball open ISM band maximum 0dBm transmit power, license-exempt use. Open 180-240 meters!
Open condition 250Kb baud rate, there are more than 240 meters signal. At this highly directional, but 2.4G diffraction and penetration is not strong, this is the drawbacks, I must explain. They are the same!

It supports six-way data channel reception

1. The low operating voltage: 1.9 ~ 3.6V low voltage operation

2. The high rate: 2Mbps, because the air transport time is very short, greatly reduced the wireless transmission of collision phenomenon Software setup 1Mbps or 2Mbps air transmission rate

3. Multi-frequency: 125 frequency, multi-point communication and frequency hopping to meet the communication needs

4. Ultra-small: Built-in 2.4GHz antenna, small size, 15x29mm It includes an antenna

5. Low power consumption: When working in answer mode communication, fast air transport and start time, greatly reduce the current consumption.

6. Low application costs: NRF24L01 integrates all RF protocols related to high-speed signal processing section, such as: automatic retransmission of lost packets and automatically generate response signals, NRF24L01 SPI interface can be used to connect the microcontroller hardware SPI port or using SCM I / O port to simulate internal FIFO can be used with a variety of high and low speed microprocessor interface, easy to use low-cost microcontroller.

7. facilitate the development: Due to the link layer is fully integrated in the module is very easy to develop. Automatic retransmission function, automatic detection and retransmission of lost packets, the retransmission time and the number of retransmissions can control software automatic storage not received response signal packets auto-answer, after receiving valid data, the module automatically sends a response signal without any additional programming carrier detect fixed frequency detection built-in hardware CRC error detection and multipoint communication address control packet transmission error counter and carrier detection function can be used to set the frequency hopping can also set the six-way receive channel address, selective open receiving channel standard pin Dip2.54MM pitch interfaces for embedded applications.

 

 

 



Related Images















Additional Information

SKU AF0502220418
Cash on Delivery No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Don't Miss Out

Stay up-to-date with the latest news, hottest trends and new arrivals direct to your inbox